![]() ![]() Apple users please contact the online JMRI users group for help at. We apologize but NCE does not have the in house resources to support Apple products. NCE currently only supports Windows 7 and Windows 10. Please be in front of your PC with working internet access before calling for assistance. If it is listed under "other" or "unknown" the driver needs to be manually installed.ĭo not attempt a Windows 10 manual driver installation of any kind without calling NCE first. If nothing is listed under ports, look for a listing under the heading of "other". If you are using JMRI, the JMRI status bar will look like this: Look for the Ports section, click on the arrow, The exact listing under ports will vary but it should look something like this: Start\Settings\Control Panel\Device Manager. ![]() Next check to see if the driver installed correctly. If this has been done prior to driver installation remove JMRI and all folders that were created during the installation. Google this well documented issue for more details.ĭo not attempt to install or run JMRI or any other software until AFTER the driver is installed and configured correctly. Be aware that MANY low cost FTDI or USB to serial cables use counterfeit clone FTDI chips which DO NOT WORK. This means that using a cable with low capacitance allows you to span longer distances without going beyond the limitations of the standard. For non-NCE supplied cables the m aximum cable length is 50 feet, or the cable length equal to a capacitance of 2500 pF. This unit does not require any modifications to the command station for proper attachment. Used to connect an NCE command station serial port on a Powerhouse, Ph-Pro, or CS02 to a standard USB PC port. This cable is a USB to Serial Interface DB9 Connection using the RS232 protocol for sending binary commands. Windows 10 users STOPE HERE and READ this article!: You need is a serial to USB cable such as this one. The Ph Pro already has a built in PC interface. Using the power available from USB to Serial adapter is not recommended, these adapters typically do not supply enough current to run ESP8266 reliably in every. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |